Precautions For The Use Of Drip Irrigation Tape

Drip irrigation tape is used in the irrigation of fruit trees, vegetables, cash crops and greenhouses. When we use this equipment to irrigate crops, in order to improve irrigation efficiency and avoid waste of water resources, we need to master the correct irrigation and operation methods. During the irrigation process, we also need to pay attention to the following details.

1. The operating pressure shall not exceed the burst pressure.

2. During transportation and laying, it is strictly forbidden to mechanically damage the drip irrigation belt.

3. The fertilizer should be melted three days in advance to ensure no particulate matter.

4. The crop planting ground should be kept as flat as possible to avoid excessive height difference.

5. The main pipe should not be directly connected to the high-pressure water pump, and a thick leather pipe should be used in the middle.

6. The drip irrigation tape should be laid flat on the ground with the water outlet facing upwards.

In addition, since the dripper of the drip irrigation belt is easy to scale and block, if the water quality is poor, we should carry out strict filtration treatment of the water source, and install a filter to prevent the entry of debris such as sand and soil.